How do I re-map keys via `drag-and-drop` ?

Here are examples of the types of keymappings you can do:

1. The `Enter` key on the numeric keypad of the PC should perform the function of the `Do` key on the VT220.
2. The `F2` key on the PC should send <CTRL>X.
3. The `F7` key on the PC should run the `ELM` command.
4. The `F9` key on the PC should run send an `escape [ 2 3 ~`.

Here are examples of how to do keymapping via `drag-and-drop`:

Note: Drag and Drop for single keystrokes. Run the Options|Keyboard Map menu command (or simply click on the keyboard icon near the right side of the PowerTerm ToolBar).

Example 1: The `Enter` key on the numeric keypad of the PC should perform the function of the `Do` key on the VT220.

1. Left-click and hold the `Do` key from `VT Keyboard` [i.e., the top half of the screen, representing the keyboard of the terminal being emulated].
2. Drag this to the `Enter` key on the numeric keypad of the `PC keyboard` of the screen.
3. Release the mouse button.

Example 2: The `F2` key on the PC should send <CTRL>X.

1. Left-click the CTRL key on the `VT Keyboard` [i.e., the top half of the screen, representing the keyboard of the terminal being emulated].
2. Left-click and hold the `^X` key.
3. Drag this to the `F2` key on the `PC keyboard` of the screen.
4. Release the mouse button.

Here are examples of how to do keymapping via `Function Button` box.:

Note: `Function Button` box for complex keymappings. Run the Options|Keyboard Map menu command (or simply click on the keyboard icon near the right side of the PowerTerm ToolBar). Then, right-click on the desired PC key you wish to program.

Example 3: The `F7` key on the PC should run the `ELM` command.

1. Right-click on the `F7` key of the `PC keyboard` portion of the screen.
2. You will see the pop-up `Function Button window, "Enter Script Commands".
3. Enter `send elm^m` and click the OK button.
4. After you exit the Keyboard Map screen you will see that `F7` on the screen has been replaced by `Cmd`.

Example 4: The `F9` key on the PC should run send an `escape [ 2 3 ~`.

1. Right-click on the `F9` key of the `PC keyboard` portion of the screen.
2. You will see the pop-up `Function Button window, "Enter Script Commands".
3. Enter `send \[23~` and click the OK button.
4. After you exit the Keyboard Map screen you will see that `F9` on the screen has been replaced by `Cmd`.